Differences between revisions 7 and 8

Picocom

Picocom 1.4 for Slackware64 14

Get SlackBuild files from:

cd /tmp
wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz
tar xvzf picocom.tar.gz
cd picocom
wget http://picocom.googlecode.com/files/picocom-1.7.tar.gz
sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild # Change from 1.4 to 1.7
su
./picocom.SlackBuild
installpkg /tmp/picocom-1.7-x86_64-1_SBo.tgz

cd /tmp
wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz
tar xvzf picocom.tar.gz
cd picocom
wget http://picocom.googlecode.com/files/picocom-1.7.tar.gz
sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild # Change from 1.4 to 1.7
su
./picocom.SlackBuild
installpkg /tmp/picocom-1.7

Exit program: ctrl+a ctrl+x

Enable local echo: ctrl+a ctrl+c

Connect pen to USB port. If the pen is connected to /dev/ttyUSB0, at a 9600 bps speed, run the following commands:

-  ⇤ ← Revision 7 as of 2013-06-27 19:54:27 → 
  Size: 1573
  Editor: 89
  Comment:
+   ← Revision 8 as of 2013-06-27 19:56:47 → ⇥
  Size: 1587
  Editor: 89
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 23:
- * vim picocom.SlackBuild, change from 1.4 to 1.7 '''VERSION=${VERSION:-1.7}'''
+ * sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild  # Change from 1.4 to 1.7
 Line 37:
- * vim picocom.SlackBuild, change from 1.4 to 1.7 '''VERSION=${VERSION:-1.7}'''
+ * sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild  # Change from 1.4 to 1.7