Picocom
Picocom 1.4 for Slackware64 14
Get SlackBuild files from:
Picocom 1.7 for Slackware64 14
1 cd /tmp
2 wget [[http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz]]
3 tar xvzf picocom.tar.gz
4 cd picocom
5 wget [[http://picocom.googlecode.com/files/picocom-1.7.tar.gz]]
6 sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild # Change from 1.4 to 1.7
7 su
8 ./picocom.SlackBuild
9 installpkg /tmp/picocom-1.7-x86_64-1_SBo.tgz
Picocom 1.7 for Slackware 14 (32 bit)
1 cd /tmp
2 wget [[http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz]]
3 tar xvzf picocom.tar.gz
4 cd picocom
5 wget [[http://picocom.googlecode.com/files/picocom-1.7.tar.gz]]
6 sed -i 's/VERSION:-1.4/VERSION:-1.7/' picocom.SlackBuild # Change from 1.4 to 1.7
7 su
8 ./picocom.SlackBuild
9 installpkg /tmp/picocom-1.7-i486-1_SBo.tgz
Exit program: ctrl+a ctrl+x
Enable local echo: ctrl+a ctrl+c
Test with pen 3G
Connect pen to USB port. If the pen is connected to /dev/ttyUSB0, at a 9600 bps speed, run the following commands: