pickit

Programmer for Microchip microcontrollers.

Link for pk2cmd https://github.com/psmay/pk2cmd

Connector pickit2 to USB and use the command

• pk2cmd -PPIC16F689

to check if the uC is on the pickit2 board

dmesg output after connecting pickit2 in Slackware 14

[ 4575.020360] usb 1-1.2: new full-speed USB device number 8 using ehci_hcd
[ 4575.108973] usb 1-1.2: New USB device found, idVendor=04d8, idProduct=0033
[ 4575.108991] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4575.109004] usb 1-1.2: Product: PICkit 2 Microcontroller Programmer
[ 4575.109047] usb 1-1.2: Manufacturer: Microchip Technology Inc.
[ 4575.109061] usb 1-1.2: SerialNumber: Ð

SDCC compiler

• http://sdcc.sourceforge.net/

• http://sdcc.sourceforge.net/mediawiki/index.php/SDCC_tutorial

• https://github.com/diegoherranz/sdcc-examples

Debian install

   1 sudo apt install sdcc
   2 cd ~
   3 git clone https://github.com/psmay/pk2cmd.git 
   4 cd pk2cmd/
   5 cd pk2cmd/
   6 sudo apt install libusb-dev  
   7 make clean
   8 make linux
   9 sudo make install 
  10 sudo cp PK2DeviceFile.dat /usr/local/bin/
  11 pk2cmd -PPIC16F689  
  12 pk2cmd 
  13 pk2cmd -PPIC16F689  /T # power on
  14 pk2cmd -PPIC16F689 # power off
  15 

Headers for pic16f689 and pic16f690

• /usr/local/share/sdcc/non-free/include/pic14/pic16f689.h
• /usr/local/share/sdcc/non-free/include/pic14/pic16f690.h