pickit

Programmer for Microchip microcontrollers.

Link for pk2cmd https://github.com/psmay/pk2cmd

Connector pickit2 to USB and use the command

to check if the uC is on the pickit2 board

dmesg output after connecting pickit2 in Slackware 14 

[ 4575.020360] usb 1-1.2: new full-speed USB device number 8 using ehci_hcd
[ 4575.108973] usb 1-1.2: New USB device found, idVendor=04d8, idProduct=0033
[ 4575.108991] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4575.109004] usb 1-1.2: Product: PICkit 2 Microcontroller Programmer
[ 4575.109047] usb 1-1.2: Manufacturer: Microchip Technology Inc.
[ 4575.109061] usb 1-1.2: SerialNumber: Ð

DS1620

Digital Thermometer and Thermostat

LM35

LM35 Precision Centigrade Temperature Sensors

TMP35

Low Voltage Temperature Sensors TMP35/TMP36/TMP37 Low voltage operation (2.7 V to 5.5 V)

LM335

The LM335 operates from −40°C to 100°C.

SDCC compiler

Debian install of pk2cmd and sdcc

   1 sudo apt install sdcc
   2 cd ~
   3 git clone https://github.com/psmay/pk2cmd.git 
   4 cd pk2cmd/
   5 cd pk2cmd/
   6 sudo apt install libusb-dev  
   7 make clean
   8 make linux
   9 sudo make install 
  10 sudo cp PK2DeviceFile.dat /usr/local/bin/
  11 pk2cmd -PPIC16F689  
  12 pk2cmd 
  13 pk2cmd -PPIC16F689  /T # power on
  14 pk2cmd -PPIC16F689 # power off
  15 
  16 wget https://deac-fra.dl.sourceforge.net/project/sdcc/sdcc-linux-amd64/4.2.0/sdcc-4.2.0-amd64-unknown-linux2.5.tar.bz2
  17 cd /tmp/
  18 rm -rf sdcc-4.2.0
  19 tar xvif sdcc-4.2.0-amd64-unknown-linux2.5.tar.bz2 
  20 cd sdcc-4.2.0/
  21 sudo cp -r * /usr/local
  22 /usr/local/bin/sdcc -v

Headers for pic16f689 and pic16f690

Eclipse for C/C++

   1 cd ~/Downloads
   2 cp eclipse-inst-jre-linux64.tar.gz /tmp
   3 cd /tmp/
   4 tar xvzf eclipse-inst-jre-linux64.tar.gz 
   5 cd /tmp/eclipse-installer
   6 ./eclipse-inst

pickit (last edited 2022-10-15 21:52:46 by localhost)