DRIVERS

To install USB drivers, download the driver from http://www.linuxnet.com/
and copy it to a temporary location.  After you have unarchived the files
copy the directory to <libdir>/pcsc/drivers/.  If the directory
<libdir>/pcsc/drivers/ does not exist, create it before copying the driver
directory to it.

Example Mac OS X, Linux 2.4:

tar -xzvf driver.bundle-0.1.0.tar.gz
cp -r driver.bundle <libdir>/pcsc/drivers/
cd <libdir>/pcsc/drivers/driver.bundle
build or use Project Builder to build

The <libdir>/pcsc/drivers/ directory should contain bundle directories only.
You must restart pcscd to use the new driver.


All OS's:

For non-USB users, you must edit the /etc/reader.conf file.
You can do this easily by running the installifd program in the utils/
directory of pcsc-lite.  Some newer drivers require you to specify 1 as the
port and then make a symlink from /dev/pcsc/1 to /dev/ttyS* so you can
enumerate your ports on any Unix without changing the driver.

Refer to the driver README for more information.

$Id: DRIVERS 867 2004-05-13 13:25:06Z rousseau $

# Edited by Robby Workman <rworkman@slackbuilds.org> to reflect correct
# information when installed from SlackBuilds.org  --  20080305

