= Toshiba C850D = == X11 == On BIOS the touchpad is defined as internal mouse (PS/2) '''/etc/X11/xorg.conf''' {{{ Section "Module" Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "freetype" Load "glx" EndSection Section "Files" FontPath "/usr/share/fonts/local/" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/OTF/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/Speedo/" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/cyrillic/" EndSection Section "ServerFlags" Option "DontZap" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbLayout" "pt" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" EndSection Section "Monitor" Identifier "My Monitor" HorizSync 31.5 - 50.0 VertRefresh 40-90 EndSection Section "Device" Identifier "VESA Framebuffer" Driver "vesa" EndSection Section "Screen" Identifier "Screen 1" Device "VESA Framebuffer" Monitor "My Monitor" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1366x768" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1366x768" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1366x768" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 32 Modes "1366x768" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "Simple Layout" Screen "Screen 1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection }}} '''/etc/kde/kdm/Xsetup''' {{{ #! /bin/sh # Xsetup - run as root before the login dialog appears setxkbmap pt }}} === ntpd === * ntpdate pool.ntp.org * chmod 755 /etc/rc.d/rc.ntpd * /etc/rc.d/rc.ntpd start * /etc/rc.d/rc.ntpd status * ntpdate -q pt.pool.ntp.org === lilo.conf === {{{ append=" vt.default_utf8=1" boot = /dev/sda bitmap = /boot/slack.bmp bmp-colors = 255,0,255,0,255,0 bmp-table = 60,6,1,16 bmp-timer = 65,27,0,255 prompt timeout = 1200 change-rules reset vga = 790 # Windows bootable partition config begins other = /dev/sda1 label = Windows table = /dev/sda # Windows bootable partition config ends # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sda4 label = Linux read-only # Linux bootable partition config ends image = /boot/vmlinuz-generic-3.2.29 initrd = /boot/initrd.gz root = /dev/sda4 label = SlackGen read-only }}} == Sound == * aplay -l # card 1: Generic_1 [HD-Audio Generic], device 0: ALC269VC Analog [ALC269VC Analog] * cd /usr/share/sounds * aplay -D plughw:1,0 pop.wav # made sound , card 1 device 0 /etc/asound.conf {{{ defaults.pcm.card 1 defaults.pcm.device 0 defaults.ctl.card 1 }}} * aplay pop.wav * usermod -G audio,users vitor # access user vitor to audio devices ... == Install VirtualBox on Slackware64 14 == For 4.3.26 http://download.virtualbox.org/virtualbox/4.3.26/VirtualBox-4.3.26-98988-Linux_amd64.run As root run the following commands: * cd * chmod 755 VirtualBox-4.3.26-98988-Linux_amd64.run * ./VirtualBox-4.3.26-98988-Linux_amd64.run * usermod -a -G vboxusers,users,audio * id #check user groups As a normal user run the following: * virtualbox --help # check the version and parameters * virtualbox #start virtualbox == Install Vagrant from source == Based on https://github.com/mitchellh/vagrant/wiki/Installing-Vagrant-from-source As root run the following: * cd /tmp * mkdir gitVagrant * cd gitVagrant * git clone https://github.com/mitchellh/vagrant.git * cd vagrant * git pull origin master #get latest version * git reset a40522f5fabccb9ddabad03d836e120ff5d14093 --hard # reset to v1.3.5 * gem install bundle #it may not be installed * bundle install * rake install * gem list * vagrant -v #check vagrant version == Install libdvdcss == * cd /tmp * wget http://slackbuilds.org/slackbuilds/14.1/libraries/libdvdcss.tar.gz * wget http://download.videolan.org/pub/libdvdcss/1.2.13/libdvdcss-1.2.13.tar.bz2 * tar xvzf libdvdcss.tar.gz * mv libdvdcss-1.2.13.tar.bz2 libdvdcss/ * cd libdvdcss/ * ./libdvdcss.SlackBuild * installpkg xyz.SBo.tgz * ln -s /dev/sr0 /dev/dvd * chmod 664 /dev/sr0 * mplayer -ao alsa -dvd:// == Upgrade from Slack64 14.0 to 14.1 == * ctrl+alt+f1 * mount /dev/cdrom /mnt/cdrom * cd /mnt/cdrom * cp slackware64 /root/ -r * cd /root * mv slackware64 slackware * telninit 1 * login as root * cd /root/slackware * upgradepkg a/glibc-solibs-*.t?z * upgradepkg a/pkgtools-*.tgz * upgradepkg a/tar-*.tgz * upgradepkg a/xz-*.tgz * upgradepkg a/findutils-*.txz * upgradepkg --install-new /root/slackware/*/*.t?z * removepkg Terminal aumix kdegames kdemultimedia ksecrets mysql printer-applet quanta rexima scim-bridge xxgdb * Check file /etc/lilo.conf to see which old kernel is used #/boot/vmlinuz-generic-3.2.29 * /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 3.10.17 | bash * In /etc/lilo.conf use image=/boot/vmlinuz-generic-3.10.17 * lilo -v * telinit 3 * reboot * After the reboot shows the kernel version 3.10.17 * On file /etc/kde/kdm/Xsetup add '''setxkbmap pt''' * In /etc/rc.d/rc.local add '''modprobe snd_mixer_oss''' * hwclock --set --date="2016-03-20 19:08:00" * hwclock -s == Upgrade from 14.1 to 14.2 == === Get and burn ISO === * wget http://ftp.slackware.com/pub/slackware-iso/slackware64-14.2-iso/slackware64-14.2-install-dvd.iso * modprobe sg # for cdrecord * cdrecord -scanbus #identify the device DVDRAM LG GP08NU6B * cdrecord -dev=6,0,0 -pad -data slackware64-14.2-install-dvd.iso * # eject the DVD after burning * cd / * mount /dev/sr0 /mnt/cdrom #check DVD * cd /mnt/cdrom * ls * cd / * umount /mnt/cdrom