Readesm

   1 # HOW TO EDIT THIS FILE:
   2 # The "handy ruler" below makes it easier to edit a package description.  Line
   3 # up the first '|' above the ':' following the base package name, and the '|' on
   4 # the right side marks the last column you can put a character in.  You must make
   5 # exactly 11 lines for the formatting to be correct.  It's also customary to
   6 # leave one space after the ':'.
   7 
   8        |-----handy-ruler------------------------------------------------------|
   9 readesm: readesm - Shows the content of digital tachograph files 
  10 readesm: This program takes an ESM file( file extensions are .esm, .dd, 
  11 readesm: .tgd or .add), downloaded from a digital tachograph or a driver card 
  12 readesm: (used in the European Union for trucks > 3.5 tons), and converts it 
  13 readesm: into human-readable form, either html or simple plaintext.
  14 readesm:
  15 readesm: Homepage: http://readesm.sourceforge.net/
  16 readesm: Homepage: http://sourceforge.net/projects/readesm/
  17 readesm:
  18 readesm:
  19 readesm:

   1 #!/bin/sh -e
   2 #V.B. revision date 2013/07/04
   3 #Set initial variables: 
   4 CWD=$(pwd)
   5 if [ "$TMP" = "" ]; then
   6   TMP=/tmp
   7 fi
   8 
   9 # The version which appears in the application's filename
  10 VERSION=2011.12pre1-Source
  11 # If the version conflicts with the Slackware package standard
  12 # The dash character ("-") is not allowed in the VERSION string
  13 # You can set the PKG_VERSION to something else than VERSION
  14 # PKG_VERSION cannot have '-' in it since the package name is composed by $APPNAME-$PKG_VERSION-$ARCH-$BUILD.tgz
  15 PKG_VERSION=2011.12pre1 # the version which appears in the package name. 
  16 ARCH=${ARCH:-i486} # the architecture on which you want to build your package   
  17 # First digit is the build number, which specifies how many times it has been built.    
  18 # Second string is the short form of the authors name, typical three initials:w
  19 BUILD=${BUILD:-1_SBo}
  20 # The application's name
  21 APP=readesm
  22 # The installation directory of the package (where its actual directory
  23 # structure will be created) 
  24 PKG=$TMP/package-$APP
  25 
  26 if [ "$ARCH" = "i486" ]; then
  27   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  28  elif [ "$ARCH" = "x86_64" ]; then
  29   SLKCFLAGS="-O2 -fPIC"
  30 fi
  31 
  32 # Delete the leftover directories if they exist (due to a previous build)
  33 # and (re)create the packaging directory
  34 rm -rf $PKG 
  35 mkdir -p $TMP $PKG
  36 rm -rf $TMP/$APP-$VERSION
  37 
  38 # Change to the TMP directory
  39 cd $TMP || exit 1
  40  
  41 # Extract the application source in TMP
  42 # Note: if your application comes as a tar.bz2, you need tar -jxvf
  43 tar -xvif $CWD/$APP-$VERSION.tar.bz2 || exit 1
  44 
  45 # Change to the application source directory
  46 cd $APP-$VERSION || exit 1
  47  
  48 # Change ownership and permissions if necessary
  49 # This may not be needed in some source tarballs, but it never hurts
  50 chown -R root:root .
  51 chmod -R u+w,go+r-w,a-s .
  52 
  53 # buils Unix makefiles
  54 cmake -G 'Unix Makefiles'
  55 
  56 echo 'Patching some source files as stated in http://sourceforge.net/p/readesm/bugs/2/'
  57 sed -i 's/Block11Record.h/block11Record.h/g' ./fileformat/DataTypes/block11Record.cpp 
  58 sed -i 's/Block11.h/block11.h/g' ./fileformat/VuBlocks/block11.cpp 
  59 sed -i 's/Block11Record.h/block11Record.h/g' ./fileformat/VuBlocks/block11.h 
  60 sed -i 's/Block13.h/block13.h/g' ./fileformat/VuBlocks/block13.cpp 
  61 sed -i 's/Block11Record.h/block11Record.h/g' ./fileformat/VuBlocks/block13.h 
  62 sed -i 's/Block13.h/block13.h/g' ./fileformat/VuBlocks/vuBlockFactory.cpp 
  63 sed -i 's/Block11.h/block11.h/g' ./fileformat/VuBlocks/vuBlockFactory.cpp 
  64 
  65 # clean the source, but exit if anything goes wrong
  66 make clean || exit
  67 
  68 # compile the source, but exit if anything goes wrong
  69 make || exit
  70  
  71 # Install everything into the package directory, but exit if anything goes wrong
  72 make install DESTDIR=$PKG || exit
  73 
  74 # Create a directory for documentation
  75 mkdir -p $PKG/usr/doc/$APP-$VERSION
  76 
  77 # Copy documentation to the docs directory and fix permissions
  78 cp -a COPYING CHANGELOG README $PKG/usr/doc/$APP-$VERSION
  79 find $PKG/usr/doc/$APP-$VERSION -type f -exec chmod 644 {} \;
  80 # slackbuild copy
  81 cat $CWD/$APP.SlackBuild > $PKG/usr/doc/$APP-$VERSION/$APP.SlackBuild
  82 
  83 echo "Create the ./install directory and copy the slack-desc into it"
  84 mkdir -p $PKG/install
  85 cat $CWD/slack-desc > $PKG/install/slack-desc
  86 
  87 echo "Add doinst.sh to package (if it exists)"
  88 if [ -e $CWD/doinst.sh.gz ]; then
  89   zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
  90 fi
  91 
  92 echo "Compress man pages if they exist"
  93 if [ -d $PKG/usr/man ]; then
  94   ( cd $PKG/usr/man
  95   find . -type f -exec gzip -9 {} \;
  96   for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
  97   ) 
  98 fi
  99 
 100 echo "Compress info pages if they exist (and remove the dir file)"
 101 if [ -d $PKG/usr/info ]; then
 102   gzip -9 $PKG/usr/info/*.info
 103   rm -f $PKG/usr/info/dir
 104 fi
 105 
 106 echo "Build the package"
 107 cd $PKG
 108 /sbin/makepkg -l y -c n $TMP/$APP-$PKG_VERSION-$ARCH-$BUILD.tgz