Picocom
Picocom 1.4 for Slackware64 14
Get SlackBuild files from:
- cd /tmp
wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz
- tar xvzf picocom.tar.gz
- cd picocom
- su
./picocom.SlackBuild
- installpkg /tmp/picocom-1.4-x86_64-1_SBo.tgz
Picocom 1.7 for Slackware64 14
- cd /tmp
wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz
- tar xvzf picocom.tar.gz
- cd picocom
vim picocom.SlackBuild, change from 1.4 to 1.7 VERSION=${VERSION:-1.7}
- su
./picocom.SlackBuild
- installpkg /tmp/picocom-1.7-x86_64-1_SBo.tgz
Picocom 1.7 for Slackware 14 (32 bit)
- cd /tmp
wget http://slackbuilds.org/slackbuilds/14.0/system/picocom.tar.gz
- tar xvzf picocom.tar.gz
- cd picocom
vim picocom.SlackBuild, change from 1.4 to 1.7 VERSION=${VERSION:-1.7}
- su
./picocom.SlackBuild
- installpkg /tmp/picocom-1.7
Exit program: ctrl+a ctrl+x
Enable local echo: ctrl+a ctrl+c
Test with pen 3G
Connect pen to USB port. If the pen is connected to /dev/ttyUSB0, at a 9600 bps speed, run the following commands:
- picocom -b 9600 /dev/ttyUSB0
- atz
- ati
- ctrl+a ctlr+x