JBLGo2

Bluetooth speaker

Slackware config

   1 cd /tmp
   2 wget https://slackbuilds.org/slackbuilds/14.2/libraries/bluez-alsa.tar.gz
   3 tar xvzf bluez-alsa.tar.gz
   4 cd bluez-alsa
   5 wget https://github.com/Arkq/bluez-alsa/archive/v1.3.1/bluez-alsa-1.3.1.tar.gz
   6 installpkg /tmp/bluez-alsa-1.3.1-i586-1_SBo.tgz
   7 bluealsa
   8 bluetoothctl

power on
scan on
connect 70:99:1C:D3:C6:92

   1 cd /usr/share/sounds/alsa
   2 aplay -D bluealsa:DEV=70:99:1C:D3:C6:92,PROFILE=a2dp Noise.wav 
   3 espeak "Hello, how are you?" -w /tmp/espeak.wav
   4 aplay -D bluealsa:DEV=70:99:1C:D3:C6:92,PROFILE=a2dp /tmp/espeak.wav

~/.asoundrc with the following content:

defaults.bluealsa.interface "hci0"
defaults.bluealsa.device "70:99:1C:D3:C6:92"
defaults.bluealsa.profile "a2dp"
defaults.bluealsa.delay 10000

   1 aplay -D bluealsa /tmp/espeak.wav
   2 alsamixer -D bluealsa
   3 mplayer -ao alsa:device=bluealsa test.mp3