JBLGo2

Bluetooth speaker

Slackware config

• cd /tmp

• wget https://slackbuilds.org/slackbuilds/14.2/libraries/bluez-alsa.tar.gz

• tar xvzf bluez-alsa.tar.gz
• cd bluez-alsa

• wget https://github.com/Arkq/bluez-alsa/archive/v1.3.1/bluez-alsa-1.3.1.tar.gz

• installpkg /tmp/bluez-alsa-1.3.1-i586-1_SBo.tgz
• bluealsa
• bluetoothctl

power on
scan on
connect 70:99:1C:D3:C6:92

• cd /usr/share/sounds/alsa
• aplay -D bluealsa:DEV=70:99:1C:D3:C6:92,PROFILE=a2dp Noise.wav
• espeak "Hello, how are you?" -w /tmp/espeak.wav
• aplay -D bluealsa:DEV=70:99:1C:D3:C6:92,PROFILE=a2dp /tmp/espeak.wav
• ~/.asoundrc with the following content:

defaults.bluealsa.interface "hci0"
defaults.bluealsa.device "70:99:1C:D3:C6:92"
defaults.bluealsa.profile "a2dp"
defaults.bluealsa.delay 10000 

• aplay -D bluealsa /tmp/espeak.wav
• alsamixer -D bluealsa